GSP-810頻譜分析儀,臺灣固緯GSP-810：GSP-810是一臺采用數字合成技術簡單易用的射頻測量儀器，頻率范圍1GHz。相位鎖定系統的設計保證了測量結果的精度，并且價格合理。GSP- 810可以適應多種測量環境，帶有1瓦特的輸入保護。精巧的外形和低的重量使得GSP-810非常便于攜帶。

GSP-810頻譜分析儀,臺灣固緯GSP-810
頻率范圍 : 150kHz ~ 1GHz
全數位鎖相回路技術設計
高頻率穩定度 : +10ppm
高頻距 (Span) 解析度提供觀察信號更詳細之能力 :0, 2kHz ~ 100MHz/DIV
解析頻寬 (RBW) : 3k, 30k, 220k, 4MHz
高輸入保護位準 : +30dBm, +25VDC
參考準位 : -30dBm ~ +20dBm
高性能之雜訊準位 : -95dBm @30kHz, -100dBm typical ; over -150dBm/Hz typical @220kHz and 4MHz RBW
突波 (Spurious) 雜訊 : < -60dB
三階交互調變雜訊 (3rd) : < -70dBc
兩組 Markers 提供值與相對值量測
其他功能 : Max. Hold, Average (2 ~ 32 traces), Freeze, Peak Search, Marker to Center Function
9 組參數設定記憶組
RS-232C 及顯示軟體可連接至 PC 擷取信號波形
選購配備 : Power Meter, Tracking Generator, Remote Control Software
GSP-810頻譜分析儀,臺灣固緯GSP-810
GSP-810是一臺采用數字合成技術簡單易用的射頻測量儀器，頻率范圍1GHz。相位鎖定系統的設計保證了測量結果的精度，并且價格合理。GSP- 810可以適應多種測量環境，帶有1瓦特的輸入保護。精巧的外形和低的重量使得GSP-810非常便于攜帶。通過標配的RS-232C接口和 windows接口軟件可以在PC上顯示頻譜儀畫面并且保存和打印測量結果
多種獨特的功能和特點使GSP-810成為一款可經濟型擴展的高測量儀器。

GSP-810頻譜分析儀,臺灣固緯GSP-810 頻率
頻率范圍	150kHz ~ 1GHz
頻率解析度	1kHz C.F. entry, 40Hz Sweep resolution at 2kHz/DIV
頻率顯示	6 1/2 digit setting
頻率控制	Digital phase locked
頻率穩定度	+2ppm/year aging, +10ppm, 0 to 50°C
頻率頻距 (Spans)	Zero, 2kHz to 100MHz/div, in a 1-2-5 sequence
頻寬
解析頻寬	3kHz, 30kHz, 220kHz, 4MHz
解析頻寬準確度	15%
視頻頻寬	1.6kHz/90kHz coupled with RBW
振幅
參考準位范圍	-30dBm 到+20dBm
參考準位準確度	+1dB at 80MHz
輸入準位范圍	-100dBm 到 +20dBm
雜訊準位	-95dBm@30kHz RBW, -100dBm typical/-75dBm:150kHz ~ 10MHz
振幅顯示范圍	75dB
振幅準確度	+ 1.5dB typical@0dBm, 80MHz
振幅準位線性	+ 1.5dB over 70dB
參考準位頻率平坦度	+1.5dB over 100MHz, +2.5dB typical over entire band/+3dB:150kHz ~10MHz
諧波突波響應	<-40dBc, RF input < selected reference
非諧波突波響應	<-60dBc typical down from reference level, average, 5MHz/div
三階交互調變雜訊 (3rd)	<-70dBc, @-40dBm input, 2 tones, 2MHz part/<-45dBc:150kHz ~10MHz
相位雜訊	-77dBc/Hz at 1GHz, 30kHz offset
輸入
輸入過載保護	+30dBm continuous, +25VDC
阻抗	50 ohm nominal
回復損失	<16 dB (VSWR < 1.35)
輸入衰減	50dB to 0dB in 10 dB steps coupled to reference level
連接頭	Type N female
游標
游標數	2
游標解析度	0.1dB, 1kHz
游標模式	值, 相對值, PK->Marker, Marker->Center
游標準確度	0.1dB+振幅準確度
其他功能
記憶	9 組參數設定記憶組
Trace	Max. Hold, Average (2 ~ 32 traces), Freeze(Hold)
設定	Access parameters
FM/AM DEMODULATOR
WB FM	120kHz deviation
MB FM	75kHz deviation
NB FM	30kHz deviation
AM Outputs	Internal speaker, 3.5mm stereo jack, wired for mono operation

GSP-810頻譜分析儀,臺灣固緯GSP-810
操作手冊 x 1, 電源線 x1

GSP-810 1GHz Spectrum Analyzer

Opt. 01	Tracking Generator		·             Frequency range: 150kHz ~ 1GHz ·             Amplitude range: -50 ~ 0dBm ·             Amplitude resolution: 1dB ·             Amplitude accuracy: ±1dB @ 0dBm, 80MHz ·             Attenuation accuracy: ±1dB @ 50MHz ·             Amplitude flatness: ±1dB @10MHz/div, 1.5dB @0dB, entire band ·             Harmonics: < -30dBc (<-25dBc, 150kHz ~ 10MHz) ·             Reverse power: < +30dBm ·             Impedance: 50 ohm nominal ·             Return loss: < 10dB (VSWR < 2) ·             Connector: Type N female
Opt. 02	Power Meter		·             Frequency Range: 10MHz ~ 2 GHz, usable to 2.7GHz ·             Power Level Range: -20 dBm ~ +23 dBm, usable to +30 dBm ·             Power Level Overload: +40 dBm < 10% duty cycle, < 10 mS duration ·             Return Loss: < 1:1.35 VSWR into 50 ohms, < 1:1.25 typical ·             Readout Resolution: 0.2 mW, 100 mW scale, 2 W, 1 mW scale; 0.1dB, Log scale ·             Accuracy: ±(10% rdg 1digit) ·             Readout: mW or dBm
Opt. 03	Remote Control Software		·             Connecting PC to get the trace and provide the control for setting
OPTIonAL ACCESSORIES
ATA-001		BNC Antenna (An additional ADP-001 is needed for fitting GSP spectrum analyzers)
ATA-002		Near Field Probe (An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)
RLB-001		Return Loss Bridge RLB Frequency Range 10MHz ~ 1GHz
GTP-3000		Passive touch Probe Set PR-03: Passive touch probe, SMA(F) ADP-002: Adaptor, SMA(J/F) ~ N(P/M) GTL-303: RF Cable Assembly, SMA(P/M), 600mm
GKT-001		General Kit set ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2 ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1 GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2 GSC-002: Kit box x 1
GKT-002		CATV Kit set ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2 ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2 GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2 GSC-003: Kit box x 1
GKT-003		RLB Kit set GAK-001: termination 50 , N(P/M) x 1 GAK-002: Cap with chain, N(P/M) x 1 GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2 GSC-004: Kit box x 1
GKT-006		EMI Probe Kit set ANT-01: 6cm Loop, H-Field Probe x 1 ANT-02: 3cm Loop, H-Field Probe x 1 ANT-03 6mm Stub tip, E- Field Probe x 1 PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1 ADP-01: N(P/M)~BNC(J/F) Adapter x 1 Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1 Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1
GTL-301		RF Cable RG 223 N(P/M), 1000mm